12-04-2018, 11:16 PM
Hi, hope there's someone here who can help. I'm a mechanical Engineer with some good controls and power electronics experience.
I've inherited dual gates with GiBiDi ART 3000 operators and an F4 Plus controller, the gates open but on expiry of the timer or command closing the RH gate does not close. The issue started intermittently, and occasionally the gale would start to move then stop. I've checked all the connections and although a bit untidy there appears to be nothing awry! Any advice on troubleshooting would be appreciated.
Cheers
I've inherited dual gates with GiBiDi ART 3000 operators and an F4 Plus controller, the gates open but on expiry of the timer or command closing the RH gate does not close. The issue started intermittently, and occasionally the gale would start to move then stop. I've checked all the connections and although a bit untidy there appears to be nothing awry! Any advice on troubleshooting would be appreciated.
Cheers
