Thread Rating:
  • 274 Vote(s) - 2.84 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Daitem SC9200AU Controller to Nice MC824
#1
Hi,
I've wired the controller up as described in your tech sheet but the controller only opens the gate. I don't have the gates auto closing so would like to be able to close them using the handset. Is this possible?, cheers.
Reply
#2
Ok, figured out how to get it to close. I swapped the wire from terminal 14 from "open" to "PP". The gates now open and close ok but the display always indicates the gates as closed. Is there any way to correct this? Cheers.
Reply
#3
The daitem is only designed to open a gate, then automatically close it "if set on the gate panel" that's why it cannot tell if the gate is open or closed,

(10-10-2014, 12:59 PM)Shropshire fella Wrote: Ok, figured out how to get it to close. I swapped the wire from terminal 14 from "open" to "PP". The gates now open and close ok but the display always indicates the gates as closed. Is there any way to correct this? Cheers.
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Nice Robus closing after photo Nexur 1 364 26-08-2025, 01:47 PM
Last Post: Jakedugmore
  Nice LFAB occasionally failing open DaveHG 3 1,898 20-08-2025, 01:52 PM
Last Post: Jakedugmore
  Nice gates don’t close after the ambient temp is high Howard 2 1,427 15-08-2025, 02:01 PM
Last Post: Jakedugmore
  Nice Control unit passcode removal Andruelectricgates 1 1,555 17-06-2025, 11:25 AM
Last Post: HarrisonN
  NICE gates open slightly then stuck Overthefence 2 2,026 21-05-2025, 10:54 AM
Last Post: Jakedugmore
  Nice Robus 250 HS Fuse Problem GLM 1 2,242 09-05-2025, 01:07 PM
Last Post: Aiden Mitton
  Looking for help with oldschool NICE gate motor gatekeeper 0 2,884 16-02-2025, 05:16 PM
Last Post: gatekeeper
  Diagnosing Nice SFAB2024 (ex XME2024) Motors devlinjayse 0 2,190 08-02-2025, 07:22 PM
Last Post: devlinjayse
  Nice RB600 - Automatic close fail and opening issues P100D 6 7,013 10-12-2024, 11:29 AM
Last Post: P100D
  Nice MC824H Set Up issue dmrgate 2 5,306 10-12-2024, 10:31 AM
Last Post: dmrgate

Forum Jump:


Users browsing this thread: 1 Guest(s)